NS0-176 PDF Dumps Mar 27, 2022 Recently Updated Questions [Q31-Q47]

NS0-176 PDF Dumps | Mar 27, 2022 Recently Updated Questions

NS0-176 Exam Questions – Valid NS0-176 Dumps Pdf

NEW QUESTION 31
Which is a valid connectivity option for a FlexPod?
Note some of these may also be 'valid' options outside of a FlexPod architecture but do not specifically meet FlexPod scalability and availability requirements.

• A. UCS B-Series > UCS FI > Catalyst 3750 < FAS
• B. UCS C-Series > 2232PP FEX > UCS FI > Nexus 5548 < FAS
• C. UCS C-Series direct attach FAS
• D. UCS B-Series direct attach FAS
• E. UCS B-series > UCS FI > 2232PP FEX > Nexus 5548 < FAS
• F. UCS B-Series > 2232PP FEX > UCS FI > Nexus 5548 < FAS
• G. UCS C-Series > Nexus 3048 < FAS

Answer: B,G

NEW QUESTION 32
You want to verify that you have configured Multipath HA correctly for all of the attached disk shelves on a NetApp cluster.
Which two commands would you execute from the cluster CLI prompt to accomplish this task? (Choose two.)

• A. node run -node * storage show disk -p
• B. sysconfig -a
• C. node run -node * -command disk show
• D. node run -node * sysconfig -a

Answer: A,B

NEW QUESTION 33
You are asked to configure the computer resources in a FlexPod solution to ensure that jumbo frames are configured end-to-end.
Which three actions must you perform to accomplish this task? (Choose three.)

• A. Configure jumbo frames on the switch VLANs.
• B. Enable jumbo frames on all of the switches between the initiator and the iSCI target.
• C. Enable jumbo frames on the operating system adapter.
• D. Set the MTU size to 1500 on the vNIC template
• E. Configure a UCS QoS System Class with the jumbo frames.

Answer: B,C,E

NEW QUESTION 34
You are creating the Gold Master Boot LUN for Windows 2012 R2 Hyper-V hosts.
In this scenario, which three steps are needed to ensure that all Hyper-V hosts will work as desired? (Choose three.)

• A. Map all Hyper-V hosts to the same Gold Master Boot LUN for consistency.
• B. Enter in the Windows license key to activate Windows before cloning the LUN.
• C. Use a temporary service profile to install and configure the OS.
• D. Use Sysprep to prepare the operating system for duplication.
• E. Disassociate the service profile before cloning the LUN.

Answer: A,B,C

NEW QUESTION 35
In which two locations is the VSAN ID configured in a FlexPod solution? (Choose two.)

• A. hypervisor adapter
• B. Nexus switches
• C. UCS Manager
• D. Storage Virtual Machine

Answer: B,C

NEW QUESTION 36
You want to run the FlexPod execution profile in NetApp Config Advisor.
Which three login credentials are required to perform this task? (Choose three.)

• A. ESXi server
• B. NetApp cluster
• C. Nexus switches
• D. UCS Manager
• E. NetApp support login

Answer: B,C,D

NEW QUESTION 37
Which two features allow multiple fabric logins through a single port? (Choose two.)

• A. vPC
• B. NPIV
• C. LLDP
• D. NPV

Answer: B,D

NEW QUESTION 38
Exhibit:

You just configured a new Storage Virtual Machine named SVM1 on your NetApp cluster to serve up NFS datastores to an ESX cluster.
Your VMware administrator tells you that the ESX servers are unable to access the datastore that you created on node flexpod1-san01-01. The IP address of one of the ESX servers is 10.33.128.100.
Referring to the exhibit, which command would you use to troubleshoot this problem?

• A. ~network ping -lif flexpod1-san01-01 mgmt1 -vserver flexpod1-san01 -destination 10.33.128.100~
• B. ~network ping -lif nfs1 -vserver svm1 -destination 10.33.128.100~
• C. ~network ping -node flexpod1-san01-01 -destination 10.33.128.100~
• D. ~network ping -lif cluster mgmt -vserver flexpodl-san01 - destination 10.33.128.100~

Answer: B

NEW QUESTION 39
How many VEMs can one server have?

• A. 0
• B. 1
• C. unlimited
• D. 2

Answer: D

NEW QUESTION 40
Your UCS environment has recently been upgraded to include UCS B-Series Servers, UCS C-Series Servers, a UCS mini, and a fourth UCS domain. With these new changes, you need a management tool to help you manage the entire environment from a single location.
In this scenario, which tool would you use?

• A. Cisco Smart Advisor
• B. UCS Central
• C. UCS Manager
• D. UCS Director

Answer: B

NEW QUESTION 41
Which two LIFs are able to failover or migrate to other nodes in the cluster? (Choose two.)

• A. intercluster LIF
• B. cluster LIF
• C. data LIF of protocol iSCSI
• D. data LIF of protocol FCoE
• E. node management LIF
• F. data LIF of protocol NFS
• G. data LIF of protocol CIFS

Answer: B,G

NEW QUESTION 42
Which FlexPod management tool allows you to manage Storage Virtual Machines (SVMs) and replication relationships?

• A. OnCommand Performance Manager
• B. OnCommand Insight
• C. OnCommand System Manager
• D. OnCommand Balance

Answer: C

NEW QUESTION 43
Which sends support summary information to NetApp through HTTPS?

• A. SnapSupport
• B. TechSupport
• C. AutoSupport
• D. FlexSupport

Answer: C

NEW QUESTION 44
A Cisco UCS system is operating in FC End-Host Mode. The fabric Interconnects are uplinked into Nexus 5672UP switches using native FC. The service profiles are unable to boot from SAN using FC.
When executing the show flogi database command on the Nexus switches, only the Fabric Interconnect port WWNs are visible. No service profile WWNs are shown.
What caused this issue?

• A. The Nexus switches do not have NPV enabled.
• B. The Nexus must be configured for FCoE instead of native Fibre Channel.
• C. The zoning on the Nexus switches is incorrect.
• D. The Nexus switches do not have NPIV enabled.

Answer: D

NEW QUESTION 45
You are asked to verify your MPIO settings for your ONTAP FlexPod solution. You are using VMware ESXi 6 and FCP as the storage protocol.
In this scenario, which MPIO setting would you use on the ESXi host?

• A. fixed path with array preference
• B. round robin
• C. fixed path
• D. most recently used

Answer: B

NEW QUESTION 46
An administrator has a Flexpod solution configured to use VMware vSphere 6.0. All virtual machines will reside on NAS datastores. Certain critical virtual machines have a requirement to use eager-zeroed thick provisioning.
In this scenario, which VMware capability should the administrator enable to satisfy the performance requirement?

• A. NetApp NFS VAAI
• B. VMware VMFS VAAI
• C. Storage I/O Control
• D. datastore clustering

Answer: B

NEW QUESTION 47
......

NetApp NS0-176 Exam Topics:

NetApp NS0-176 Exam Certification Details:

NS0-176 dumps Sure Practice with 141 Questions: https://realpdf.free4torrent.com/NS0-176-valid-dumps-torrent.html