[Dec-2024] Latest SAP C-TS422-2023 Certification Practice Test Questions [Q15-Q34]

[Dec-2024] Latest SAP C-TS422-2023 Certification Practice Test Questions

Verified C-TS422-2023 Dumps Q&As - 1 Year Free & Quickly Updates

NEW QUESTION # 15
Which of the following questions do you have to answer before you start creating a bill of material (BOM)?

• A. Is the material type allowed in the BOM?
• B. In which storage location is the BOM required?
• C. Which base unit of measure does the material have?
• D. What status does the BOM have?

Answer: A

Explanation:
Before you create a BOM, you need to check if the material type of the header material is allowed in the BOM usage. The material type defines the attributes and functions of a material, such as whether it is a finished product, a raw material, or a trading good. The BOM usage defines the purpose and application of a BOM, such as production, engineering, or sales. Only certain combinations of material types and BOM usages are valid in SAP S/4HANA. For example, you cannot create a production BOM for a material type that is not relevant for production planning. Reference: [SAP S/4HANA Production Planning and Manufacturing Certification Guide], page 63; [SAP Help Portal: Material Type].

NEW QUESTION # 16
You have maintained the parameters for simple discontinuation in the material master of a component.
Which business process will be affected if the available stock is zero the discontinuation date is in the past?

• A. Production order release
• B. Material requirements planning
• C. Back flushing
• D. Kanban

Answer: B

NEW QUESTION # 17
What is the difference between coproducts byproducts?Note: There are 2 correct answers to this question.

• A. Only coproducts have movement type 531.
• B. Only coproducts have movement type 101.
• C. Only coproducts appear in the process or production order settlement rule.
• D. Only coproducts have a nonzero inventory valuation.

Answer: B,C

NEW QUESTION # 18
How can you set up the supply source for the Kanban process in SAP S/4HANA?
Note: There are 3 correct answers to this question.

• A. Use purchasing costs for automated source prioritization.
• B. Use run schedule quantities for in-house production.
• C. Use purchase orders for external procurement.
• D. Use quotations for internal and external procurement
• E. Use stock transfer reservations for stock transfer.

Answer: B,C,E

Explanation:
You can set up the supply source for the Kanban process in SAP S/4HANA by using different replenishment strategies, depending on whether the material is procured internally or externally. For internal procurement, you can use run schedule quantities, which are calculated based on the Kanban quantity and the number of Kanbans. For external procurement, you can use purchase orders, which are created automatically when a Kanban status changes to EMPTY. For stock transfer, you can use stock transfer reservations, which are also created automatically when a Kanban status changes to EMPTY and trigger a goods movement from the supplying plant to the receiving plant. Reference: Replenishment Strategies, Stock Transfer with Kanban, External Procurement with Kanban

NEW QUESTION # 19
What happens when you set up detailed scheduling with the finite scheduling mode Insert Operation? Note: There are 2 correct answers to this question.

• A. Scheduling of an operation takes place as close as possible to the desired date.
• B. Changes are automatically implemented in the complete collective order.
• C. Sequencing on multiactivity resources is automatically updated.
• D. Neighboring operations can be moved in both directions in order to create a slot.

Answer: A,B

NEW QUESTION # 20
What will happen in the MRP run if you have created a new MRPrelevant material that supports both inhouse production external procurement?

• A. The MRP run does NOT consider the material; it has to be planned interactively.
• B. The MRP run assumes inhouse production.
• C. The MRP run assumes external procurement.
• D. The MRP run plans the material only if a quotation has been maintained.

Answer: B

NEW QUESTION # 21
Which of the following elements does MRP take into account during net requirement calculation? Note: There are 2 correct answers to this question.

• A. ATP quantities
• B. Production orders
• C. Planned orders (unfirmed)
• D. Planned orders (firmed)

Answer: B,D

NEW QUESTION # 22
What are some benefits of planning with planned independent requirements for finished materials? Note: There are 2 correct answers to this question.

• A. Option to use maketoorder production
• B. Option to forecast planning for production resources
• C. Reduced times for final assembly
• D. Reduced delivery times

Answer: C,D

NEW QUESTION # 23
Which information is required when you create a product master in SAP S/4HANA Cloud Private Edition? Note: There are 2 correct answers to this question.

• A. Industry sector
• B. Selection screen for views
• C. Product type
• D. Base unit of measure

Answer: A,D

NEW QUESTION # 24
Which time elements are part of a routing operation?
Note: There are 3 correct answers to this question.

• A. Wait time
• B. Processing time
• C. Setup time
• D. Pick time
• E. Float before production

Answer: A,B,C

NEW QUESTION # 25
Which actions does the system perform by default when you save a confirmation for a finished product in repetitive manufacturing? Note: There are 3 correct answers to this question.

• A. Create associated capacity requirements.
• B. Post the goods receipt for the finished product.
• C. Reduce run schedule quantities.
• D. Update statistics for the Business Information Warehouse.
• E. Post production costs to the planned order.

Answer: A,C,E

NEW QUESTION # 26
What does forecasting in the dem planning cycle include? Note: There are 3 correct answers to this question.

• A. Past quotation quantities
• B. Past production planning quantities
• C. Market intelligence
• D. Past sales order quantities
• E. Oneoff events

Answer: C,D,E

NEW QUESTION # 27
What could be the reason for multiple commitments, where several operations have the same scheduled dates on a work center after dispatching?
Note: There are 2 correct answers to this question.

• A. The Finite Scheduling indicator is NOT set in the strategy profile.
• B. The Change Planning Direction indicator is set in the strategy profile
• C. Alternative work centers are fully occupied.
• D. The work center has several individual capacities

Answer: A,D

Explanation:
Multiple commitments occur when several operations are scheduled to start or finish at the same time on a work center. This can happen for different reasons, depending on the settings of the strategy profile and the work center. Two possible reasons are:
The Finite Scheduling indicator is NOT set in the strategy profile. This means that the system does not consider the capacity availability of the work center when scheduling the operations. The system only checks the basic dates and the relationships between the operations. Therefore, the system can schedule multiple operations at the same time on the same work center, resulting in multiple commitments.
The work center has several individual capacities. This means that the work center can perform several operations simultaneously, depending on the number and type of individual capacities. The system assigns the operations to the individual capacities based on the capacity category and the priority. However, if the individual capacities have the same capacity category and priority, the system can assign multiple operations to the same individual capacity, resulting in multiple commitments.

NEW QUESTION # 28
What are the prerequisites for a reporting point confirmation in repetitive manufacturing? Note: There are 2 correct answers to this question.

• A. Defining the relevant work centers in the routing
• B. Activating the reporting point backflush in the order dependent parameters
• C. Defining the operations as reporting points using the control key
• D. Activating the reporting point backflush in the work centers

Answer: C,D

NEW QUESTION # 29
What are the consequences when you assign a planned order to a production line manually, using the planning table in repetitive manufacturing?

• A. The planned order is converted to a production order.
• B. The planned order generates capacity requirements
• C. The planned order's component availability is checked.
• D. The planned order's components are copied to the picking list.

Answer: B

Explanation:
When you assign a planned order to a production line manually, using the planning table in repetitive manufacturing, the system generates capacity requirements for the planned order. The capacity requirements are calculated based on the production line, the quantity, and the production rate of the planned order. The system also checks the availability of the production line and displays any capacity overload or underload. The planned order is not converted to a production order, nor is the component availability or the picking list affected by the manual assignment. Reference: SAP Help Portal - Assigning Planned Orders to Production Lines, SAP S/4HANA Production Planning and Manufacturing Certification Guide - Chapter 7: Repetitive Manufacturing

NEW QUESTION # 30
You want to create a production order. What methods can you use?
Note: There are 2 correct answers to this question.

• A. Create by order release
• B. Convert a purchase requisition
• C. Create in Kanban process
• D. Create without material

Answer: C,D

NEW QUESTION # 31
Under what circumstances can you change the material type for a material if stocks, reservations, or purchasing documents exist? Note: There are 2 correct answers to this question.

• A. The quantity and value updates are the same
• B. The same account category is used
• C. The same base unit of measure is used.
• D. The same batch management level is used

Answer: A,C

Explanation:
You can change the material type for a material if stocks, reservations, or purchasing documents exist only if the following conditions are met:
The same base unit of measure is used. This ensures that the material quantity is consistent across different material types.
The quantity and value updates are the same. This ensures that the material valuation is consistent across different material types.
The material is not subject to split valuation. This ensures that the material has only one valuation class and price control. Reference: [SAP Help Portal] - Change Material Type

NEW QUESTION # 32
How can a material availability check be triggered automatically for a production order? Note: There are
2 correct answers to this question.

• A. By mass processing
• B. By order release
• C. By capacity planning
• D. By order confirmation

Answer: A,B

NEW QUESTION # 33
What could be the reason for different combinations of components in a multiple bill of material (BOM)? Note: There are 2 correct answers to this question.

• A. Manufacturing date
• B. Lot size
• C. BOM header status
• D. BOM component status

Answer: A,B

NEW QUESTION # 34
......

SAP C-TS422-2023 Exam Syllabus Topics:

Latest 2024 Realistic Verified C-TS422-2023 Dumps - 100% Free C-TS422-2023 Exam Dumps: https://realpdf.free4torrent.com/C-TS422-2023-valid-dumps-torrent.html