[Aug 24, 2022] Reliable 1z0-1075-22 Exam Tips Test Pdf Exam Material
New 2022 1z0-1075-22 Test Tutorial (Updated 69 Questions)
NEW QUESTION 26
A production Operator is executing work order in your plant. After completing move transactions, he notices that he has performed some incorrect move operations, including incorrect scrap and reject transactions. He is required to perform a reverse transaction to correct the errors. The operations are not count point enabled and not auto charged.
Identify the four transactions to correct this situation.
- A. Reverse from reject to ready.
- B. Reverse the product at the last operation.
- C. Reverse from scrap to ready.
- D. Reverse resources charged to a work order.
- E. Reverse at an operation.
- F. Reverse material issued to a work order.
Answer: A,C,D,F
NEW QUESTION 27
Your customer has multiple distribution centers and a few manufacturing plants. Plants make different items with some overlap between them in terms of productsmanufactured. The distribution centers stock parts from all plants. A Corporate Engineering team is responsible for centrally defining items and catalogues. This team defines the items and sets the attributes for most parameters. The respective distribution centers and manufacturing plants are allowed to change some attributes locally.
Identify two different ways of achieving this requirement.
- A. Set up Plants and Distribution Centers as Inventory organizations and Corporate Engineering organization as Inventory Organization.
- B. Set up Plants as Inventory Organizations, Distribution Centers as Item Organizations, and CorporateEngineering organization as Inventory Organization.
- C. Set up Plants as Inventory Organizations, Distribution Centers as Item Organizations, and Corporate Engineering organization as Item Organization.
- D. Set up Plants as Inventory Organizations, Distribution Centers as Inventory Organizations, and Corporate Engineering organizations as Item Organization.
- E. Set up Plants and Distribution Centers as Inventory organizations and Corporate Engineering organization as Item Organization
Answer: D,E
NEW QUESTION 28
Identify four parameters that are considered in the calculation of manufacturing lead time in Oracle Manufacturing Cloud.
- A. The lot size of the item
- B. Resource calendar exceptions
- C. Resource calendars of the work centers involved
- D. The primary work definition of the item
- E. The shifts are defined in the plant calendar
- F. Plant calendar exceptions
Answer: A,B,D,E
NEW QUESTION 29
During a Manufacturing Cloud implementation, the Production Supervisor wants to close thework orders for last month and wants to make sure that the work orders include the correct cost.
Identify the approach to be taken by the Production Supervisor.
- A. The Production Supervisor need not include cost variances while costing last month's workorders because those can be applied directly in subledger accounting.
- B. Work order costs can be updated anytime regardless of the status of the work order.
- C. The Production Supervisor needs to include all costs and variances in last month's work orders and close them; however, the work orders where updates are expected, should not be closed.
- D. The Production Supervisor should make sure that all costs are included while closing last month's work orders; however, variances can be included after closing the work orders.
Answer: C
NEW QUESTION 30
Identify the three changes that are allowed to be made to active Work Definition in a Work Center, without creating a new version.
- A. Production Priority
- B. Delete an Operation
- C. Add an Operation
- D. Completion Subinventory
- E. Costing Priority
Answer: A,C,D
NEW QUESTION 31
A manufacturing cloud user wants to print information available in the work order in PDF.
Identify the three reports that the user can print directly from the work order screen using the Print PDF action.
- A. Print Component List
- B. Bill of material
- C. Resource List
- D. Work Order Traveler
- E. Print Labels
Answer: A,D,E
NEW QUESTION 32
One of the key execution capabilities that Oracle Manufacturing Cloud offers is thatyou can generate and manage work order exceptions.
Which option shows the production exception types that can be reported by the production operator?
- A. Work Area, Work Center, Resources, Components, and Miscellaneous
- B. Work Center and Resources
- C. Work Area, Work Center, and Resources
- D. Resources and Components
- E. Work Area, Work Center, Resources, and Components
Answer: D
NEW QUESTION 33
In your customer's manufacturing facility, different types of Movement Requests are created. Key manufacturing components are issued to the work orders form the manufacturing subinventory. The manufacturing subinventory receives its supplies formthe Warehouse subinventory through automatically created Movement Requests.
Which type of Movement Requests should you use to fill the manufacturing subinventory form the Warehouse subinventory?
- A. Replenishment Requests
- B. Batch Wave Movement Requests
- C. Requisition Movement Requests
- D. Pick Wave MovementRequests
Answer: C
NEW QUESTION 34
Identify three requirements fulfilled by nonstandard work orders.
- A. Repair
- B. Rework
- C. Rescheduling
- D. Prototype
Answer: A,B,D
NEW QUESTION 35
A Production Operator needs to load Work Order Transactions from an external system into Manufacturing Cloud.
Identify the correct sequence of tasks to be performed.
- A. Export File to UCM server> Load Data to Fusion repository> Process Import Operations Transactions> Load file from UCM to Interface table.
- B. LoadData to Fusion repository> Export File to UCM server > Process Import Operations Transactions> Load file from UCM to Interface table.
- C. Load Data to Fusion repository> Load File from UCM to Interface table> Export File to UCM server> Process Import Operations Transactions.
- D. Load Data to Fusion repository> Export File to UCM server > Load file from UCM to Interface table
>Process Import Operations Transactions.
Answer: A
NEW QUESTION 36
Identify three types of Item Quantities displayed in the Work Order History tab.
- A. In Process Quantity
- B. Scrapped Quantity
- C. Total Quantity
- D. Remaining Quantity
- E. Completed Quantity
Answer: B,D,E
NEW QUESTION 37
You arereviewing the production status of your manufacturing plant shop floor as a production supervisor.
Your production manager wants a report on a work order statuswhich is reserved against a particular customer.
The final assembly of the work order is serialized.
Which option shows the steps to complete the task using the mobile application?
- A. Select the infotile Customer to open the work order details page> Click Actions and select the E-mail icon> Select required work orders>Select the e-mail client, enter the recipient's e-mail, and click Send.
- B. Use your mobile camera to scan the bar coded serial number of the final assembly> Upload the barcode to open the work order details page > Click Actions and select the E-mail icon> Select required work orders> Select the e-mail client, enter the recipient's e-mail, and click Send.
- C. Search the work order by customer name to open the work order details page> Click Actions and select the E-mail icon> Select required work orders> Select the e-mail client, enter the recipient's e-mail, andclick Send.
- D. Use your mobile camera to scan the bar coded serial number of the final assembly> Upload the barcode to open the work order details page> Select required work orders> Click Social icon (OSN) > Select recipient, and click Share.
Answer: B
NEW QUESTION 38
Which two steps should you use to create a new Oracle Transactional Business Intelligence report in the ManufacturingCloud?
- A. Use ibots to create the report.
- B. Use Business Intelligence publisher to create a template anduse that template to create the report.
- C. Use the Manufacturing subject area to select the report columns and create the report.
- D. Use Business Intelligence answers to create the report.
Answer: B,D
Explanation:
Explanation
You can use Oracle Transactional Business Intelligence to create analysis and Oracle Business Intelligence Publisher to create reports.
NEW QUESTION 39
A Work Center created a month ago is no longer in use now. You want to remove theWork Center; however, the system is no allowing you to delete it.
Identify three reasons for this.
- A. The Work Center is being referenced in the Open Work Order.
- B. The work center is being referenced in the Work Area.
- C. There are resources associated with the Work Center.
- D. The Work Center is being referenced in the Closed Work Order.
- E. The work center is being references in the work definition operation.
Answer: A,B,C
NEW QUESTION 40
As a production supervisor, you require immediate access to critical shop floor execution systems to take actionwhile on the go.
Which four work order related actions can be taken in the Manufacturing Supervisor mobile application?
- A. Reviewing customer information of work orders
- B. Creating a new standard or non standard work order
- C. Releasing work orders using quick swipe details
- D. Reviewing operation, component, and resource detail
- E. Searching for work orders and sending them through e-mail
- F. Executing standard work order and updating item and resource usage
Answer: A,C,D,E
NEW QUESTION 41
In what three ways can you set the overcompletion tolerance for a subcomponent yield, so the job order can report the excess production completion?
- A. Overcompletion Tolerance Type = Percentage, value = 100
- B. Overcompletion Tolerance Type = Percentage, value = 0
- C. Overcompletion Tolerance Type = Amount, value > 0
- D. Overcompletion Tolerance Type = Percentage, value > 0
- E. Overcompletion Tolerance Type = Amount,value = 0
Answer: B,D,E
NEW QUESTION 42
Identify the two configurations in Supply Chain cloud applications of Product Information Management (PIM) and Order promising (GOP), which must be set to process the Back-to-Back order with Make Supply Order, for a nonstocked item.
- A. Create Supply Order Orchestration Defaulting and Enrichment Rule for the nonstocked item.
- B. Create Supply Chain Orchestration Supply Execution Document Creation Rule for the nonstocked item.
- C. Set the global sourcing rule in GOP to determine supply creation option as Make.
- D. Set a local sourcing rule in GOP to determine supply creation option as Make.
- E. Set the nonstocked item to be back-to-back enabled in Product Information Management (PIM).
Answer: C,E
NEW QUESTION 43
An order entry specialist creates a Back-to-Back order for product item with an intention of fulfilling by in-house manufacturing. The fulfillment line is scheduled and Supply Chain Orchestration (SCO) has initiated creation of a Supply Order rather than Work Order.
Identify two options that can cause this situation.
- A. Sourcing rules for the product item are defined as Buy as well as Transfer.
- B. Sourcing rule for the product item is defined asMake, but Work Definition is not defined.
- C. Sourcing rules for the product item are defined as Make as well as Transfer.
- D. Sourcing rule for the product item is defined as Buy.
Answer: B,C
NEW QUESTION 44
Your customer wants to mass create and modify Work Definitions and the relevant operation, items, and resources available in the spreadsheet.
Which two operations are not supported using ADFDI (Oracle Application Development Framework Desktop Integration)?
- A. Create and update ATO (Assemble To Order) model work definitions
- B. Update Work Definitions
- C. Populate Descriptive flexfields
- D. Create Work Definitions
Answer: A,C
NEW QUESTION 45
Planning Central has collected manufacturing data for a Work Order WO-2045 (Make Item AS1000), where actual duration of work order is 2 days. Item AS1000 manufacturing lead time is 1.25 days.
A plan is run and the Work Order WO-2045 is rescheduled.
Identify the duration of the rescheduled Work Order WO- 2045.
- A. Rescheduled Work Order WO-2045 duration = 1.25 days
- B. Rescheduled Work Order WO-2045 duration = 2 days
- C. Rescheduled Work Order WO-2045 duration = 0.75days
- D. Rescheduled Work Order WO-2045 duration = 3.25days
Answer: C
NEW QUESTION 46
To reduce the subassembly stock with no impact on material planning of child components of the subassemblies stock, you need to modify the multilevel item structure of a product.
Identify the action that meets this requirement.
- A. Change the Supply Type = Operation Pull in Item definition and Work Definition, for subassemblies having high inventory stock.
- B. Change the Supply Type = Assembly Pull in Item definition and Work Definition, for subassemblies having high inventory stock.
- C. Change the Supply Type = Phantom in Item definition and Work Definition, for subassemblies having high inventory stock.
- D. Change the Supply Type = Push in Itemdefinition and Work Definition, for subassemblies having high inventory stock.
Answer: B
NEW QUESTION 47
Your customer hasthe following business requirement. There are two work definitions created in the application. One Work Definition for Engine Finished Good and other Work Definition for Pallet Finished Good. The Engine Finished Good item should have Pallet Finished Goodsas one of its component.
Identify the way to establish the relationship between Pallet and Engine Work Definitions.
- A. The Work Definition versions can be used to tie the Work Orders.
- B. Create a Subinventory that could be the completion Subinventory for yielding the pallet and then the same Subinventory can serve as the supply Subinventory of the pallet in the Work Definition created for Engine.
- C. Assign a higher priority to the Work Definition created for Engine and a lower one for the Work Definition for Pallet.
- D. The two Work Definitions can be tied through Projector Seiban numbers.
Answer: A
NEW QUESTION 48
Your customer is a light assembly manufacturing company that doesn't require shop floor control. A manufacturing engineer wants to generate a work definition automatically for some items, and wants to eliminate the explicit maintenance of work definitions.
Which three steps must be completed and verified in the Work Definition area?
- A. Select a resource that is to be used inautomatic work definition by enabling the attribute Default for automatic work definition.
- B. Ensure there is only one default standard operation at a given point in time.
- C. Ensure the item isa standard item with a secondary item structure.
- D. Select a standard operation that is to be used in automatic work definition by enabling the attribute Default for automatic work definition.
- E. Ensure the predefined work definition name ORA_MAIN name is active.
Answer: C,D,E
NEW QUESTION 49
You want to use a predefined Standard Operation in a Work Definition, but you also want to change the usage of the Standard Operation resource. Identify the setup required.
- A. Use a Resource exception for the resource and alter its usage.
- B. Select the Referenced check box while adding the standard operation to the work definition and change the usage manually.
- C. Deselect the Referenced check box while adding the standard operation to the work definition and change the usage manually.
- D. Use the Transfer and Edit Standard Operation functionality to edit the resource usage.
Answer: B
NEW QUESTION 50
......
1z0-1075-22 Cert Guide PDF 100% Cover Real Exam Questions: https://realpdf.free4torrent.com/1z0-1075-22-valid-dumps-torrent.html