[Apr 01, 2024] Lesson Brilliant PDF for the 1Y0-440 Tests Free Updated Today
Get New 2024 Valid Practice CCE-N 1Y0-440 Q&A - Testing Engine
Citrix 1Y0-440 certification is highly valued by employers and customers as it validates the candidate's expertise in designing and implementing Citrix networking solutions. Architecting a Citrix Networking Solution certification demonstrates that the candidate has the necessary knowledge and skills to plan, design, and deploy Citrix networking solutions based on Citrix ADC and Citrix Gateway. Architecting a Citrix Networking Solution certification also provides an opportunity for individuals to advance their careers in Citrix networking solutions and increase their earning potential.
NEW QUESTION # 56
Which two features are supported on LbaaSV1? (Choose two.)
- A. Server name Indicator
- B. Layer 7 Load Balancing
- C. Certificate Bundle
- D. Layer 4 Load balancing
- E. Cookie Insertion
Answer: A,D
NEW QUESTION # 57
Scenario: A Citrix Architect has set up NetScaler MPX devices in high availability mode with version
12.0.53.13 nc. These are placed behind a Cisco ASA 5505 Firewall. The Cisco ASA Firewall is configured to block traffic using access control lists. The network address translation (NAT) is also performed on the firewall.
The following requirements were captured by the architect during the discussion held as part of the NetScaler security implementation project with the customer's security team:
The NetScaler MPX device:
* should monitor the rate of traffic either on a specific virtual entity or on the device. It should be able to mitigate the attacks from a hostile client sending a flood of requests. The NetScaler device should be able to stop the HTTP, TCP, and DNS based requests.
* needs to protect backend servers from overloading.
* needs to queue all the incoming requests on the virtual server level instead of the service level.
* should provide protection against well-known Windows exploits, virus-infected personal computers, centrally managed automated botnets, compromised webservers, known spammers/hackers, and phishing proxies.
* should provide flexibility to enforce the decided level of security check inspections for the requests originating from a specific geolocation database.
* should block the traffic based on a pre-determined header length, URL length, and cookie length. The device should ensure that characters such as a single straight quote ("); backslash (\); and semicolon (;) are either blocked, transformed, or dropped while being sent to the backend server.
Which security feature should the architect configure to meet these requirements?
- A. Geolocation-based blocking using Application Firewall
- B. geolocation-based blocking using Responder policies
- C. Global Server Load balancing with Dynamic RTT
- D. Global Server Load Balancing with DNS views
Answer: C
NEW QUESTION # 58
Scenario: A Citrix Architect needs to assess an existing Citrix ADC configuration. The customer recently found that members of certain administrator groups were receiving permissions on the production Citrix ADC appliances that do NOT align with the designed security requirements. Click the Exhibit button to view the configured command policies for the production Citrix ADC deployment.
To align the command policy configuration with the security requirements of the organization, the__________for________________should change. (Choose the correct option to complete the sentence.)
- A. priority; Item 2
- B. command spec; Item 6
- C. priority; Item 5
- D. action; Item 1
- E. command spec; Item 3
- F. action; Item 4
Answer: B
NEW QUESTION # 59
Scenario: A Citrix Architect needs to assess a NetScaler Gateway deployment that was recently completed by a customer and is currently in pre-production testing. The NetScaler Gateway needs to use ICA proxy to provide access to a XenApp and XenDesktop environment. During the assessment, the customer informs the architect that users are NOT able to launch published resources using the Gateway virtual server.
Click the Exhibit button to view the troubleshooting details collected by the customer.
What is the cause of this issue?
- A. The required ports have NOT been opened on the firewall between the NetScaler gateway and the Virtual Delivery Agent (VDA) machines.
- B. The Citrix License Server is NOT reachable.
- C. The StoreFront URL configured in the NetScaler gateway session profile is incorrect.
- D. The Secure Ticket Authority (STA) servers are load balanced on the NetScaler.
Answer: D
NEW QUESTION # 60
Which two features are supported on LbaaSV1? (Choose two.)
- A. Server name Indicator
- B. Certificate Bundle
- C. Layer 7 Load Balancing
- D. Layer 4 Load balancing
- E. Cookie Insertion
Answer: C,D
NEW QUESTION # 61
Scenario: A Citrix Architect and a team of Workspacelab members met to discuss a NetScaler design project.
They captured the following requirements from this design discussion:
* A pair of NetScaler MPX appliances will be deployed in the DMZ network.
* High Availability will be accessible in the NetScaler MPX in the DMZ Network.
* Load balancing should be performed for the internal network services like Microsoft Exchange Client Access Services and Microsoft App-V.
* The load balancing should be performed for StoreFront.
* The NetScaler Gateway virtual server will be utilizing the StoreFront load-balancing virtual server.
* The NetScaler Gateway virtual server and StoreFront.
* The NetScaler Gateway virtual service and StoreFront and load-balancing services are publicly accessible.
* The traffic for internal and external services must be isolated.
Click the Exhibit button to review the logical network diagram.
Which two design decisions are incorrect based on these requirements? (Choose two.)
- A. NetScaler Gateway VIP bound to Traffic Domain 1
- B. SNIP 192.168.20.2 bound to Traffic Domain 1
- C. LB StoreFront bound to traffic Domain 0
- D. LB APP-V bound to Traffic Domain 1
Answer: A,C
NEW QUESTION # 62
_________ content type supports sending NITRO commands to NetScaler. (Choose the correct option to complete sentence.)
- A. Application/json
- B. Text/html
- C. Application/sgml
- D. Text/enriched
Answer: B
NEW QUESTION # 63
Scenario: A Citrix Architect has configured two MPX devices in high availability mode with version
12.0.53.13 nc. After a discussion with the security team, the architect enabled the Application Firewall feature for additional protection.
In the initial deployment phase, the following security features were enabled:
* IP address reputation
* HTML SQL injection check
* Start URL
* HTML Cross-site scripting
* Form-field consistency
* After deployment in pre-production, the team identifies the following additional security features and changes as further requirements:
* Application Firewall should retain the response of form field in its memory. When a client submits the form in the request, Application Firewall should check for inconsistencies in the request before sending it to the web server.
* All the requests dropped by Application Firewall should get a pre-configured HTML error page with appropriate information.
* The Application Firewall profile should be able to handle the data from the RSS feed and an ATOM-based site. Click the Exhibit button to view an excerpt of the existing configuration.
What should the architect do to meet these requirements?
- A. Configure a new HTML profile and use previously used Application Firewall security checks.
- B. Configure a new profile with XML and use previously used Application Firewall security checks.
- C. Modify an existing HTML profile and disable 'Drop invalid security check'
- D. Configure a new profile with web 2.0 and use the previously used Application Firewall security checks.
Answer: D
NEW QUESTION # 64
A Citrix Architect needs to configure advanced features of Citrix ADC by using StyleBooks as a resource in the Heat service.
What is the correct sequence of tasks to be completed for configuring Citrix ADC using the Heat stack?
- A. 1. Install Citrix ADC Bundle for OpenStack
2. Deploy the Heat stack
3. Register OpenStack with Citrix Application Delivery Management
4. Add Citrix ADC instances (Optional)
5. Prepare the HOT by using the Citrix ADC Heat resources and Citrix ADC Network Resource
6. Create service packages (Add OpenStack tenants) - B. 1. Install Citrix ADC Bundle for OpenStack
2 Add Citrix ADC instances (Optional)
3. Create service packages (Add OpenStack tenants)
4. Prepare the HOT by using the Citrix ADC Heat resources and Citrix ADC Network Resource
5. Register OpenStack with Citrix Application Delivery Management
6. Deploy the Heat stack - C. 1. Install NetScaler Bundle for OpenStack
2. Prepare the HOT by using the NetScaler heat resources and NetScaler Network Resource
3. Register OpenStack with NMAS
4. Deploy the Heat stack
5. Add NetScaler instances (Optional)
6. Create service packages (Add OpenStack tenants) - D. 1. Install Citrix ADC Bundle for OpenStack
2 Register OpenStack with Citrix Application Delivery Management
3. Add Citrix ADC instances (Optional)
4. Create service packages (Add OpenStack tenants)
5. Prepare the HOT by using the Citrix ADC Heat resources and Citrix ADC Network Resource
6. Deploy the Heat stack
Answer: D
Explanation:
Explanation
-
Workflow to configure ADC instances using Heat
NEW QUESTION # 65
Scenario: A Citrix Architect needs to design a hybrid XenApp and XenDesktop environment which will include Citrix Cloud as well as resource locations in an on-premises datacenter and Microsoft Azure.
Organizational details and requirements are as follows:
* Active XenApp and XenDesktop Service subscription
* No existing NetScaler deployment
* Global Server Load Balancing is used to direct connection requests to Location B, if the StoreFront server in Location B fails, connections should be directed to Location A.
Click the Exhibit button to view the conceptual environment architecture.
The architect should use _____ in Location A, and should use ________ in Location B.
(Choose the correct option to complete the sentence.)
- A. NetScaler ADC (BYO); No NetScaler products
- B. NetScaler ADC (BYO); NetScaler gateway appliance
- C. NetScaler ADC (BYO); NetScaler ADC (BYO)
- D. NetScaler Gateway appliance; NetScaler ADC (BYO)
- E. NetScaler Gateway appliance; NetScaler Gateway appliance
Answer: A
NEW QUESTION # 66
Scenario: A Citrix Architect needs to design a hybrid Citrix Virtual App and Citrix Virtual Desktop environment which will include as well as resource locations in an on-premises datacenter and Microsoft Azure.
Organizational details and requirements are as follows:
Active Citrix Virtual App and Citrix Virtual Desktop Service subscription No existing Citrix deployment Minimization of additional costs All users should use same access point, regardless of network location No multi-factor authentication is required Click the Exhibit button to view the conceptual environment architecture.
The architect should use___________ in Location A, and should use _______________ in Location B. (Choose the correct option to complete the sentence.)
- A. No Citrix ADC products; Citrix Gateway appliance
- B. No Citrix ADC products; Citrix ADC (BYO)
- C. Citrix gateway as a Service; Citrix ADC (BYO)
- D. Citrix Gateway as a Service; Citrix ICA Proxy (cloud-licensed)
- E. Citrix Gateway as a Service; no Citrix ADC products
- F. No Citrix ADC products; Citrix ICA Proxy (cloud-licensed)
Answer: E
NEW QUESTION # 67
Scenario: A Citrix Architect has implemented two high availability pairs of MPX 5500 and MPX 11500 devices respectively with 12.0.53.13 nc version. The Citrix ADC devices are set up to handle Citrix Gateway. Load Balancing. Application Firewall, and Content Switching. The Workspacelab infrastructure is set up to be monitored with Citrix Application Delivery Management version 12.0.53.13 nc by the Workspacelab administrators. The Workspacelab team wants to implement one more pair(s) of Citrix ADC MPX 7500 devices with version 12.0.53.13 nc.
The Citrix consulting team has assigned the task to implement these Citrix ADC devices in the infrastructure and set them up to be monitored and managed by Citrix ADC Management and Analytics {Citrix Application Delivery Management).
The following are the requirements that were discussed during the project initiation call:
Citrix Application Delivery Management should be configured to get the infrastructure information under sections such as HDX Insight, WEB Insight, and Security Insight.
Configuration on the new MPX devices should be identical to that of MPX 11500 devices.
Configuration changes after the deployment and initial setup should be optimized using Citrix Application Delivery Management.
Citrix Application Delivery Management should be utilized to configure templates that can be utilized by the Workspacelab team in future deployments.
As per the requirement from the Workspacelab team, Citrix Application Delivery Management should store the audited data for only 15 days.
However, the architect is NOT able to view any Information under Analytics. What should the architect do to fix this issue?
- A. Use Public Stylebooks and templates to configure the new MPX 11500 devices.
- B. Use nsconfig from MPX 11500 devices and copy the same config to MPX 7500 devices.
- C. Use configuration jobs to replicate the entire configuration from MPX 11500 Instance to MPX 7500 devices.
- D. Use Inbuilt Stylebooks and templates to configure the new MPX 11500 devices.
Answer: C
NEW QUESTION # 68
Scenario: A Citrix Architect needs to design a new Citrix Gateway deployment for a customer. During the design discussions, the architect documents the key requirements for the Citrix Gateway.
Click the Exhibit button to view the key requirements.
The architect should configure Citrix Gateway for __________________in order to meet the stated requirements. (Choose the correct option to complete the sentence.)
- A. ICA proxy
- B. Client access
- C. VPN access
- D. ROP proxy
Answer: A
NEW QUESTION # 69
Which two types of database deployments are supported in Citrix Application Delivery Management? (Choose two.)
- A. Multiple Server
- B. Cluster instance
- C. Cloud Services
- D. High Availability
- E. Single Server
Answer: D,E
NEW QUESTION # 70
Scenario: A Citrix Architect has set up Citrix ADC MPX devices in high availability mode with version
12.0.53.13 nc. These are placed behind a Cisco ASA 5505 firewall. The Cisco ASA firewall is configured to block traffic using access control lists. The network address translation (NAT) is also performed on the firewall. The following requirements were captured by the architect during the discussion held as part of the Citrix ADC security implementation project with the customer s security team: The Citrix ADC MPX device:
* should monitor the rate of traffic either on a specific virtual entity or on the device. It should be able to mitigate the attacks from a hostile client sending a flood of requests. The Citrix ADC device should be able to stop the HTTP, TOP, and DNS based requests.
* needs to protect backend servers from overloading.
* needs to queue all the incoming requests the virtual server level instead of the service level.
* should provide access to resources on the basis of priority.
* should provide protection against well-known Windows exploits, virus-infected personal computers, centrally managed automated botnets. compromised webservers, known spammersThackers. and phishing proxies.
* should provide flexibility to enforce the desired level of security check inspections for the requests originating from a specific geolocation database.
* should block the traffic based on a predetermined header length, URL length, and cookie length.The device should ensure that characters such as a single straight quote (') backslash (): and semicolon (;) are either blocked, transformed, or dropped while being sent to the backend server.
Which security feature should the architect implement to meet these requirements?
- A. Configure HTML SQL Injection check on Application Firewall and enable Block SQLSplCharANDKeyword.
- B. Configure signatures manually and apply them to the Application Firewall profile.
- C. Configure HTML cross-Site scripting and enable Check Request headers.
- D. Configure HTML SQL injection check on Application Firewall and enable Transform SQL special characters.
Answer: D
NEW QUESTION # 71
Scenario: A Citrix Architect holds a design discussion with a team of Workspacelab members, and they capture the following requirements for the NetScaler design project.
* A pair of NetScaler MPX appliances will be deployed in the DMZ network and another pair in the internal network.
* High availability will be accessible between the pair of NetScaler MPX appliances in the DMZ network.
* Multi-factor authentication must be configured for the NetScaler Gateway virtual server.
* The NetScaler Gateway virtual server is integrated with the StoreFront server.
* Load balancing must be deployed for users from the workspacelab.com domain.
* The workspacelab users should be authenticated using Cert Policy and LDAP.
* All the client certificates must be SHA 256-signed, 2048 bits, and have UserPrincipalName as the subject.
* Single Sign-on must be performed between StoreFront and NetScaler Gateway.
After deployment, the architect observes that LDAP authentication is failing.
Click the Exhibit button to review the output of aaad debug and the configuration of the authentication policy.
Exhibit 1
Exhibit 2
What is causing this issue?
- A. IdapLoginName is set as sAMAccountName
- B. UserNamefield is set as subjection
- C. Password used is incorrect
- D. User does NOT exist in database
Answer: B
NEW QUESTION # 72
Scenario: A Citrix Architect has set up NetScaler MPX devices in high availability mode with version 12.0.53.13 nc. These are placed behind a Cisco ASA 5505 Firewall. The Cisco ASA Firewall is configured to block traffic using access control lists. The network address translation (NAT) is also performed on the firewall.
The following requirements were captured by the architect during the discussion held as part of the NetScaler security implementation project with the customer's security team:
The NetScaler MPX device:
should monitor the rate of traffic either on a specific virtual entity or on the device. It should be able to mitigate the attacks from a hostile client sending a flood of requests. The NetScaler device should be able to stop the HTTP, TCP, and DNS based requests.
needs to protect backend servers from overloading.
needs to queue all the incoming requests on the virtual server level instead of the service level.
should provide protection against well-known Windows exploits, virus-infected personal computers, centrally managed automated botnets, compromised webservers, known spammers/hackers, and phishing proxies.
should provide flexibility to enforce the decided level of security check inspections for the requests originating from a specific geolocation database.
should block the traffic based on a pre-determined header length, URL length, and cookie length. The device should ensure that characters such as a single straight quote ("); backslash (\); and semicolon (;) are either blocked, transformed, or dropped while being sent to the backend server.
Which security feature should the architect configure to meet these requirements?
- A. Geolocation-based blocking using Application Firewall
- B. Global Server Load balancing with Dynamic RTT
- C. geolocation-based blocking using Responder policies
- D. Global Server Load Balancing with DNS views
- E. Global Server Load Balancing with Mac Based Forwarding
Answer: A
NEW QUESTION # 73
For which two reasons should a Citrix Architect perform a capabilities assessment when designing and deploying a new Citrix ADC in an existing environment? (Choose two.)
- A. Determine operating system and application usage.
- B. Identify other planned projects and initiatives that must be integrated with the design and build phase.
- C. Establish and prioritize the key drivers behind a project.
- D. Determine the new environment networking requirements.
- E. Assess and identify potential risks for the design and build phase.
Answer: B,E
NEW QUESTION # 74
Scenario: A Citrix Architect has met with a team of Workspacelab members for a design discussion. They have captured the following requirements for the Citrix ADC design project:
Multi-factor authentication must be configured for the Citrix Gateway virtual server.
The Citrix Gateway virtual server is integrated with the Citrix Virtual Apps and Desktops environment.
Load balancing must be configured for the StoreFront server.
Authentication must be deployed for the users from the workspacelab.com and vendorlab.com domains.
The logon page must have the workspacelab logo on it.
Certificate verification must be performed to identify and extract the username.
The client certificate must have UserPrincipalName as a subject.
All the managed workstations for the workspacelab users must have the client identification certificate installed on them.
The workspacelab users connecting from the internal network should be authenticated using LDAP.
The workspacelab users connecting from the external network should be authenticated using LDAP and RADIUS.
The vendorlab users should be authenticated using Active Directory Federation Service.
The user credentials must NOT be shared between workspacelab and vendorlab.
Single Sign-on must be performed between StoreFront and Citrix Gateway.
A domain drop down list must be provided if the user connects to the Citrix Gateway virtual server externally.
The domain of the user connecting externally must be identified using the domain selected from the domain drop down list.
Which authentication policy must the architect execute first to meet the design requirements?
- A. Cert
- B. RADIUS
- C. LDAP UPN
- D. SAML
Answer: B
NEW QUESTION # 75
Which request can a Citrix Architect utilize to create a NITRO API command to add a NetScaler appliance with NSIP address 10.102.29.60 to the cluster?
- A. Option C
- B. Option A
- C. Option D
- D. Option B
Answer: B
NEW QUESTION # 76
......
Citrix 1Y0-440 exam covers a wide range of topics, including Citrix ADC deployment and management, traffic management, security, and optimization. Candidates will need to understand how to configure and manage Citrix ADC appliances, implement load balancing and content switching, and secure their Citrix networking solution using SSL offloading, authentication, and authorization. They will also need to understand how to optimize their Citrix networking solution to ensure the best performance and user experience.
Citrix 1Y0-440 exam is intended for professionals who have experience with Citrix technologies and want to advance their careers in networking. It is also suitable for IT architects, engineers, consultants, and administrators who want to gain expertise in designing and deploying Citrix Networking solutions. 1Y0-440 exam consists of multiple-choice questions and simulations that test your understanding of networking concepts and your ability to apply them in real-world scenarios.
1Y0-440 Dumps PDF - 100% Passing Guarantee: https://realpdf.free4torrent.com/1Y0-440-valid-dumps-torrent.html